A tray of homemade peppermint bark recipe pieces with dark and white chocolate layers, topped with crushed candy canes and red sprinkles

Easy Peppermint Bark Recipe

Easy Peppermint Bark Recipe

A good peppermint bark recipe is simple. Melt dark chocolate, spread it in a pan, let it set a little, then pour melted white chocolate on top and sprinkle crushed candy canes over it while it is still wet. Chill 1 to 2 hours, break the slab into pieces, and it looks like it took all afternoon. It makes about 24 pieces, with 15 minutes of hands-on work.

Quick answer: how do you make peppermint bark?

Melt 12 ounces of dark chocolate, spread it in a lined 9 by 13 inch pan, and chill 20 to 30 minutes until firm. Melt 12 ounces of white chocolate, spread it over the dark layer, and sprinkle 1/2 cup of crushed candy canes on top right away. Chill 1 to 2 hours, then break into about 24 pieces. For a faster version, swap both chocolates for almond bark.

What is peppermint bark

Peppermint bark is a two-layer chocolate candy. The bottom layer is dark chocolate, and the top layer is white chocolate with crushed candy canes pressed into it. The peppermint comes from the candy canes, not from a flavoring oil, though a little peppermint extract helps if they are mild.

It is popular at Christmas because it needs no baking, no thermometer, and no special equipment. It travels well, which makes it a strong choice for cookie swaps and gift boxes. It costs less than most store-bought tins, and the pieces stack neatly if you keep them cool.

Peppermint bark recipe ingredients

You need four things for the classic version, plus peppermint extract if you want a stronger mint flavor. Buy chocolate you would eat plain. The chocolate is the whole recipe, so cheap waxy chocolate shows up in the finished candy. Ghirardelli or Toll House chips work well.

Use standard red and white candy canes, not the flavored ones. You need 1/2 cup of crushed pieces, from about 6 canes. Skip mini candy canes. They crush unevenly and are too big to press into the chocolate. Add 1/2 teaspoon of peppermint extract for more mint. Do not use mint extract by accident. It tastes like toothpaste in candy.

How to make peppermint bark step by step

Line a 9 by 13 inch pan with parchment paper. Crush the candy canes first, before any chocolate is melted. Put them in a zip-top bag and tap them with a rolling pin until you have small pieces and crumbs.

Melt the dark chocolate in a microwave-safe bowl in 30 second bursts, stirring well between each one. It takes about 90 seconds. Pour the melted chocolate onto the lined pan and spread it into an even layer with a spatula, about 1/4 inch thick. Then chill 20 to 30 minutes until firm.

If the dark layer is still soft, the layers blur. If it is too cold, they split. Melt the white chocolate the same way. Stir in the peppermint extract, pour the white chocolate over the dark layer, and spread it gently. Sprinkle the candy canes on top right away and press them down lightly. Chill 1 to 2 hours, until the slab is firm. Lift it out by the parchment and break it into about 24 pieces.

The almond bark shortcut and no white chocolate version

Almond bark is a vanilla-flavored coating that melts smoothly and sets firm at room temperature. It is not actual almond. Most brands are nut-free, but read the label for nut allergies. Use 12 ounces of chocolate almond bark for the bottom layer and 12 ounces of vanilla almond bark for the top. It is hard to scorch and sets fast, so you can often skip the chill between layers. The trade-off is flavor: almond bark is sweeter and less complex than real chocolate.

If you do not like white chocolate, use two dark chocolate layers, or a dark layer with milk chocolate on top, and put the crushed candy canes on the top layer. Add 1/2 teaspoon of peppermint extract to the top layer. A single thick dark layer works too. Spread it about 1/2 inch thick and break it into about 36 smaller pieces.

How to package peppermint bark as gifts

Put 6 to 8 pieces in a 4 by 6 inch cellophane bag, tie the top with ribbon, and add a tag with the flavor and date. For a nicer gift, use a small tin. A 6 inch round tin holds 12 to 18 pieces layered with parchment paper between them.

For a gift box, pair the bark with other treats. A bag of bark next to a mug of our Christmas hot chocolate recipe mix makes a simple present. Add a few pieces to our Christmas charcuterie board and set out a plate of our oatmeal no bake cookies and our brown sugar chocolate chip cookies next to it. Label each bag “Keep cool, eat within 2 weeks.”

Storage and shelf life

Store peppermint bark in an airtight container at cool room temperature for up to 2 weeks. Keep it away from the stove and out of direct sunlight. Chocolate melts at around 86 to 90 degrees Fahrenheit, so a warm kitchen softens the pieces. If your kitchen runs warm, use the fridge instead.

In the fridge, it keeps for up to 4 weeks. In the freezer, it keeps for up to 3 months. Freeze the pieces in a single layer first, then bag them. Thaw in the fridge overnight. For food safety guidance, see FoodSafety.gov. White chocolate can develop a white film, called bloom, in a warm spot. It is safe to eat, but it looks chalky.

Troubleshooting peppermint bark

Chocolate seizing is the most common problem. It happens when even a drop of water gets into melted chocolate, and the chocolate turns stiff and grainy in seconds. Seized chocolate cannot be fixed, so start over with dry equipment.

Layers separating is the second most common problem. It happens when the dark layer is too cold when the white layer goes on. Chill the dark layer 20 to 30 minutes, until firm to the touch, but not longer.

If the topping falls off, the white chocolate was too set when you sprinkled it on. Next time, sprinkle within a minute of spreading the white layer and press the pieces down lightly. If the bark is too thick or too thin, the pan size is the cause.

Easy peppermint bark

Two layers of dark and white chocolate topped with crushed candy canes. No baking, and ready to gift in about 2 hours.

Prep time: 15 minutes | Chill time: 1 to 2 hours | Total time: 1 hour 15 minutes to 2 hours 15 minutes

Servings: about 24 pieces | Calories: about 140 per piece (estimated)

Equipment

  • Baking sheet, 9 by 13 inches
  • Parchment paper
  • Two microwave-safe bowls
  • Rubber spatula
  • Zip-top bag and rolling pin
  • Measuring cups and spoons

Ingredients

  • 12 ounces (340 g) dark chocolate chips or chopped dark chocolate bars
  • 12 ounces (340 g) white chocolate chips or chopped white chocolate bars
  • 1/2 cup (about 75 g) crushed candy canes, from about 6 standard candy canes
  • 1/2 teaspoon peppermint extract (optional)

Instructions

  1. Line a 9 by 13 inch pan with parchment paper.
  2. Crush the candy canes in a sealed bag with a rolling pin.
  3. Melt the dark chocolate in 30 second bursts, stirring between bursts.
  4. Spread the dark chocolate on the lined pan, about 1/4 inch thick.
  5. Chill 20 to 30 minutes, until the dark layer is firm to the touch.
  6. Melt the white chocolate the same way, in 30 second bursts.
  7. Stir in the peppermint extract, if using.
  8. Pour the white chocolate over the dark layer and spread it gently.
  9. Sprinkle the candy canes on top right away and press them down lightly.
  10. Chill 1 to 2 hours, until the slab is fully firm.
  11. Lift the slab out by the parchment and break it into about 24 pieces.

Almond bark shortcut

Use 12 ounces of chocolate almond bark for the bottom and 12 ounces of vanilla almond bark for the top. Melt and layer the same way. The chill between layers is about 10 minutes.

No white chocolate version

Use two dark chocolate layers, or a dark layer with milk chocolate on top. Add 1/2 teaspoon of peppermint extract to the top layer. Or spread one thick dark layer, about 1/2 inch thick, and break it into about 36 smaller pieces.

Substitutions

  • Dark chocolate: use milk chocolate for a sweeter bark, or semisweet chips for a less sweet one.
  • White chocolate: use vanilla almond bark for a faster set, or a second dark chocolate layer and skip it.
  • Candy canes: use crushed peppermint candies if you cannot find them. Avoid flavored canes.
  • Peppermint extract: skip it for milder mint flavor. Do not use mint extract. It tastes like toothpaste in candy.

Storage and reheating

Store in an airtight container at cool room temperature for up to 2 weeks, in the fridge for up to 4 weeks, or in the freezer for up to 3 months. Freeze in a single layer first, then bag it. Thaw overnight in the fridge.

Tips

  • Crush the candy canes before you melt any chocolate.
  • Keep all equipment dry. Even a drop of water can seize melted chocolate.
  • Chill the dark layer 20 to 30 minutes until firm. Too cold and the layers split.
  • Sprinkle the topping within a minute, while the white layer is still wet.
  • Use a spatula for even layers, which break into even pieces.

Troubleshooting

  • Chocolate seized and grainy: water got in. Start over with dry equipment.
  • Layers separating: dark layer was too cold. Chill 20 to 30 minutes next time.
  • Topping falling off: white chocolate was too set. Sprinkle within a minute and press down lightly.
  • Bark too thick or too thin: wrong pan size. A 9 by 13 inch pan gives 1/4 inch layers.

Frequently asked questions

Can I make peppermint bark with almond bark?

Yes. Use 12 ounces of chocolate almond bark for the bottom layer and 12 ounces of vanilla almond bark for the top, in place of the chocolate chips. It melts smoothly and sets in about 10 minutes, but it tastes sweeter.

How long does peppermint bark last?

Up to 2 weeks at cool room temperature in an airtight container, up to 4 weeks in the fridge, and up to 3 months in the freezer. Keep it away from heat and sunlight.

Why did my peppermint bark layers separate?

The dark layer was too cold when you poured the white chocolate on top, so the white chocolate set without bonding. Chill the dark layer 20 to 30 minutes, until firm to the touch, but not longer.

Can I make peppermint bark without white chocolate?

Yes. Use two dark chocolate layers, or a dark layer with a milk chocolate layer on top, and sprinkle the crushed candy canes on the top layer. Add 1/2 teaspoon of peppermint extract to the top layer.

Why did my chocolate seize?

Water got into the melted chocolate. Even a small drop is enough to turn chocolate stiff and grainy. Wipe the bowl and spatula dry before you start. Seized chocolate cannot be fixed, so start a fresh batch.

How do I crush candy canes for peppermint bark?

Put the candy canes in a zip-top bag, seal it, and tap them with a rolling pin until you have a mix of small pieces and crumbs. You need 1/2 cup, from about 6 canes.

Can I freeze peppermint bark?

Yes. Freeze the pieces in a single layer first, then move them to a freezer bag. They keep for up to 3 months. Thaw in the fridge overnight.

How many pieces does this peppermint bark recipe make?

About 24 pieces from a 9 by 13 inch pan, broken by hand or cut with a knife. For a single dark chocolate layer, break the slab into about 36 smaller pieces.

Follow Kitchennista

Love our recipes? Follow us for new recipes, kitchen tips and ideas.

Leave a Comment

Your email address will not be published. Required fields are marked *